SHERWOOD PALLET GATE
- Do you have an unprotected high level loading point?
- Can a person fall or a load be accidentally dislodged?
- Are you liable if someone falls or gets injured by falling objects?
Where it is necessary to remove a section of protective handrailing or catenary chains to provide openings on high level platforms or scaffolds for the handling of goods, there are periods of time when the high level platform is not guarded. This increases the risk of the operator falling to the ground, or the load becoming inadvertently dislodged and falling.
WE HAVE THE ANSWER
The Sherwood Pallet Gate provides protection for personnel working at levels above ground when engaged in loading or unloading goods by any means, especially by overhead crane or fork-lift.
It is designed to give permanent and continuous protection to anyone working at a high level loading point. Once installed, the pallet safety gate must be used by the operator to gain access to the load or goods, ensuring they are never without protection.
The Sherwood Pallet Gate comes as a standard or can be ‘tailor made’ for each loading point to accommodate varying site conditions, having regard for height and width of load, head clearance and other variables. For high loads, a different configuration is used in the form of an ‘SP’.
Our pallet safety gate is in the form of a swinging gate, revolving about a horizontal axis between two fixed pivot points and swinging through an arc of 180 degrees for the standard gate or 90 degrees for the ‘SP’ gate.
The standard material used for construction is ‘Duragal’ galvanised tube. These pallet loading safety gates, sometimes referred to as an up and over pallet gate or mezzanine pallet gate, are designed to AS 1657, the Australian standard for fixed platforms, walkways, stairways and ladders.
The Sherwood Pallet Gate is robustly designed and built for commercial / industrial use.
There are a number of advantages to using our up and over pallet gate, including:
- Small floor space envelope
- Robustly designed and built for commercial/industrial use
- Simple operation
- Set and forget – operator must use it to gain access to the load
“Supplying industry for over 30 years, the Sherwood product has been installed Australia wide as well as in South East Asia, the Pacific, and even Mawson Base Antarctica!”
For higher or extra wide loads you need the SP Sherwood Pallet Gate
All Sherwood Pallet Gates are designed to accommodate pallet lifters.
FILL IN THE FORM BELOW AND WE’LL SELECT THE APPROPRIATE PALLET GATE FOR YOUR SITUATION.
NOTE: PLEASE DON’T ADD CLEARANCE ALLOWANCES ONTO YOUR LOAD SIZE.